> For the complete documentation index, see [llms.txt](https://docs.anthriq.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.anthriq.com/bxi-studio/configure/instinct/headset-height.md).

# Adjust headset height

<figure><img src="https://2761951758-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FhtBZnSGOC4EMhU3nc5oM%2Fuploads%2FynHnRr098Tmgxq7S6nUy%2FInstinct%20Headset%20Height.png?alt=media&amp;token=9839b190-aea7-475e-8bee-67ae837e3bf1" alt=""><figcaption></figcaption></figure>

This screen tunes the overall vertical position of the headset. The control moves every electrode up or down at once.

## Adjust the height

* Press the **Up arrow** to raise the headset.
* Press the **Down arrow** to lower it.
* Long-press for continuous movement.
* The position indicator shows the current height value.

## When to adjust

* If the front electrodes (FP1, FP2) sit too high on the forehead, move the headset down.
* If the back electrodes (O1, O2) sit too low on the neck, move it up.
* Aim for even pressure across all electrode positions.

## Continue to Configure Electrodes

Click **Next** to proceed to [Headset Height Adjustment](https://docs.anthriq.com/bxi-studio/configure/instinct/headset-height.md), where you fine-tune each channels position.

> **Note:** Part or move hair aside under each electrode position. Hair between the electrode and scalp is the most common cause of poor impedance readings.
