> For the complete documentation index, see [llms.txt](https://docs.anthriq.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.anthriq.com/bxi-studio/configure.md).

# Configure

Per-session setup once a device is connected. Bind a subject, calibrate the hardware where required, and lay out channels / gain for the device variant.

## Pages

* [Set up a subject](/bxi-studio/configure/subject-setup.md): bind the session to a named subject so saved config persists.

### Instinct flow

1. [Calibrate the Instinct headset](/bxi-studio/calibration/calibration.md)
2. [Select head size](/bxi-studio/configure/head-size.md)
3. [Wear the headset](/bxi-studio/configure/wear-headset.md)
4. [Adjust headset height](/bxi-studio/configure/headset-height.md)
5. [Configure electrodes](/bxi-studio/configure/electrode-config.md)

### xSys flow

1. [Connect electrodes](/bxi-studio/configure/connect-electrodes.md)
2. [Name channels](/bxi-studio/configure/channel-naming.md)
3. [Set gain and frequency](/bxi-studio/configure/gain-frequency.md)

### xBud flow

1. [Connect Electrodes](/bxi-studio/configure/analog-input-configurations-xbud.md#step-1-rename-channels)
2. [Analog Input Configurations](/bxi-studio/configure/analog-input-configurations-xbud.md#step-2-configure-signal-settings)
3. [Review Device Specs](/bxi-studio/configure/analog-input-configurations-xbud.md#step-3-review-device-specs)